PDA

View Full Version : UPR Pro Street Double Adjustable UCA Issue



PaulB
03-07-10, 12:17 PM
Installed UCA http://www.uprproducts.com/mustang-chrome-moly-pro-street-double-adjustable-upper-05.html (http://www.uprproducts.com/mustang-chrome-moly-pro-street-double-adjustable-upper-05.html) and had contact issues
See attached photo's - did anyone with 2005-2010 mustang have this problem?

The UCA was hitting casting knubs and both the knubs and the UCA was grinded down so they did not hit - put semi circle in UCA to avoid hitting as well.

SloSVO
03-11-10, 10:30 AM
Another UPR FAIL!! I've never liked UPR stuff.. they just seem el cheapo copies... I've never bought UPR stuff and never will.. Just going from what friends have dealt with..

4Jenna
03-11-10, 11:49 AM
WOW, thats crazy. I would call UPR and also send the pics to see what they say. You should not have to deal with that!

-Chris

BUSTED
03-16-10, 10:22 AM
I hope this does not come off rude in any way......but I am almost 100% sure it is was installed upside down. I made this mistake with the UPR's on my car lol. There is no tab welded like that on the other side right? This is so you don't have this issue.

BUSTED
03-16-10, 11:09 AM
45234522

This is the best I could do to get them back into shape after installing them upside down.

The 1st picture is after I sent the arm off to powdercoating, note the ding on the upper control arm "ear" from before.

I realize it is not the exact same car, but it is a UPR part that had a very similar issue. I just needed to flip the bracket over.

PaulB
03-16-10, 12:40 PM
Both sides looked the same to me.. even looking at yours it looks somewhat different. Did send pictures etc. to UPR with no response at yet. By the way, wish my car looked so clean underneath that I could eat off it, but alas, I live on a dirt road.

BUSTED
03-16-10, 02:54 PM
I would call UPR & ask for Jeremy. He has always done me well over there. It can take a little bit for them to get back with you sometimes.

svtrichie
03-16-10, 05:11 PM
jeremy is a great guy and am sure that he will help out. I never had a problem with mine.

SloSVO
03-25-10, 11:56 PM
what ever did you find out?

PaulB
03-26-10, 01:28 PM
No response as yet from UPR.. Mechanic was asking UPR for response, not me. I observed install, but did not see a whole lot. My question at this point:

If infact it's installed upside down, is it OK to leave this way?

Having ground down parts that touched it seems to be operating fine with more traction than b4.

SloSVO
03-26-10, 01:31 PM
i don't see it being too hard to just remove it and flip it around.. if its backwards

PaulB
03-26-10, 01:35 PM
Did not have lift, so rather difficult getting into that area from underneath.

BUSTED
04-01-10, 05:51 PM
I had a minute I thought I would go to UPR's website. Look at the way it is in the picture. There is no brace on the other side of the arm and it is also flipped over in UPR's relocation bracket. Again I'm about 100% sure this is an install mistake.

http://www.uprproducts.com/mustang-chrome-moly-pro-series-double-adjustable-upper-3rd-link-mount-05.html

But on a side note, I'm sure it will work fine with the ding your tech helped put in your new part.