PDA

View Full Version : 2004 Mustang Cobra E-85 Tuning -- Burntire Burning Corn.



BurnTire
11-09-10, 03:31 PM
Finally got around to the E-85 conversion.
Whipple 19PSI
Ford 80lb injectors
Twin Gt Pumps, Fore Hat, Mdmjr. BAP still needs installed.
Aerquip TFE -8 Line , Aeromotive E-85 compatible Filter.

I tune the 80lb injectors on VP 109 with the stoich set at 13.6 "Thanks to Devin at PSR Tuning for the STFT and Load Suggestions"

E-85 Tune

I changed the delta pressure to 50psi and changed the stoich to 9.76 and loaded the tune.

I drained the tank then added the E-85 which tested at 87% from Apache Sands in Mesa, AZ.

The car idles perfect. I did a few throttle hits and the A/F is in the mid 11's which is exactly how the race fuel was.

I will have more info when I get the BAP in.

silvrsvt
11-09-10, 04:40 PM
let me know when you go to the track I want to witness the first burntire burning corn pass!

IansBAJ
11-09-10, 07:51 PM
let me know when you go to the track I want to witness the first burntire burning corn pass!

I second that notion!

fazm
11-09-10, 08:39 PM
not until january right?

BurnTire
11-09-10, 09:26 PM
not until january right?

Sounds about right.

BurnTire
11-11-10, 12:05 AM
Got the Boost a Pump installed. Duty Cycle was 99% set on 30. Set on 50 the duty cycle is 81%.

Impressions so far.

When I first started the car on E85 I though somethings was wrong. I could only hear the blower wine and the idle was so smooth.
The car has never idled this nice on pump or race gas. Very Very smooth on E-85.

I have 19 degrees of timing in the car and it blows off the tires as bad as 23 degrees with race gas.

I can imagine how 23 degrees is going to feel. It will be a monster.

I am going to try to pull some more data by reducing the timing to 17.

El Jefe
11-11-10, 11:03 AM
No dyno time? Should of added 60-75rwhp. Have you seen the tester?

http://www.streetlegaltv.com/forum/attachment.php?attachmentid=2756&stc=1&d=1248377363

http://www.summitracing.com/parts/QFT-36-E85/

BurnTire
11-11-10, 11:17 AM
5118

4Jenna
11-11-10, 11:20 AM
Awesome!!!

Guess I gotta up my boost....lol

silvrsvt
11-12-10, 10:10 AM
awesome! cant wait to see some numbers!

2nd2nunn
11-14-10, 11:17 PM
only 23? on the 3.4 e85 cars where about 24-25 on 25PSI. cant wait to see some dyno numbers im guessing 664RWHP

BurnTire
11-17-10, 10:19 PM
A Big Thanks to PSR Tuning for letting me use their dyno today. The car put down 601 on 24 Degrees of timing.

Rev'n Kevin
11-17-10, 10:31 PM
So will I see you at Pinks All Out this weekend?

BurnTire
11-17-10, 10:31 PM
Unfortunately I work.

El Jefe
11-18-10, 01:10 PM
I wonder how much power is eaten by the auto.

BurnTire
11-18-10, 01:20 PM
Probably 75 at least. Peak HP is not that important. It is the torque multiplication that gets you down the track.

Gene
11-28-10, 10:18 PM
I need to make the switch and have Devin tune my heep. I already have the BAP, twin GT pumps, Modified FPDM, and -8 line. So I just need 80# injectors then?

BurnTire
11-29-10, 12:01 AM
I need to make the switch and have Devin tune my heep. I already have the BAP, twin GT pumps, Modified FPDM, and -8 line. So I just need 80# injectors then?

Yea 80's and an E-85 tester also.

Gene
11-29-10, 09:43 PM
whats the tester? I buy straight ethanol in 55 gallon drums for my other job. i wonder if I could just use that?

BurnTire
11-29-10, 10:26 PM
whats the tester? I buy straight ethanol in 55 gallon drums for my other job. i wonder if I could just use that?

It is in the image above. You add water to the water line and E-85 to the top line. The water will separate and show the ethanol content.

You could mix the E-85 yourself. You will be out of injector and pump with 100%.