PDA

View Full Version : Getting my '97 Cobra dyno-tuned tomorrow...



ford1svt
07-27-12, 02:23 PM
Mostly stock (BBK CAI & Throttle body, exhaust). What do you guys think she'll lay down?

It's a Dynojet (AZ Dyno Chip in Chandler).

The tuner is pretty optimistic - he thinks she's good for 300 RWHP +/-. He knows a lot more about it than me and I sure hope he's right!

Have a great Friday guys!

1tuff68
07-28-12, 02:06 PM
300 would be a really good number for a stock motor. Good luck!

ford1svt
07-28-12, 04:49 PM
She managed 275 RWHP / 267 RWTQ. The good news (I guess) is that the tuner feels it can run better. I need to bring it back for more work to diagnose why the numbers were not what he thinks they should be. It could be poor gas (I lent the car to a relative and can't vouch for the quality or octane). It also could be the side exit exhaust. I hoped for better - but in reality, it came with 305 and I've only added a few mods. Maybe 300 was wishful thinking! :-}

1tuff68
07-29-12, 07:57 AM
Those are very respectable numbers. If you use 17% as your drive train loss, that puts you at about 330 at the crank. It's all about making the most with what you've got :Bucktooth:

ford1svt
07-29-12, 10:33 AM
To be honest, 275 is exactly what I expected initially. The tuner convinced me that it would go higher. I'll fill it with some good gas and wait until it's a little less humid and go back to see what's up.

Mystic544
07-30-12, 08:58 PM
Not bad at all ....
When you say exhaust, do you mean just cat back?

I need to get my 96 Cobra tuned now that I am here and prem is only 91 octane and it is crazy hard to find/high $$$ for 100 :(
Would Really like to get a re-worked intake before the tune ... even better would be to also do a PnP on the heads and add cams

With the below mods and the super high humidity midwest air she was at 298
JBA Silver Ceramic Headers
Bassani o/r X-pipe
Hooker Aero Chamber Cat-Back Exhaust
Ceramic Coated WMS Cold Air Intake with 87mm Pro-M and K&N Filter
ASP Underdrive Pulleys
Bilstein Shocks & Struts
Pro3i LCA's, UCA's & C/C Plates
FMS C Springs
FMS 4.10 gear, 31 Splin & Trac Lock
SCT Custom Dyno Tune

ford1svt
07-31-12, 07:14 AM
Yeah, I should have been more clear! Stock manifolds, x-pipe and catback side exhaust. Do you have short or long tube headers?

Mystic544
07-31-12, 10:58 AM