PDA

View Full Version : Mustang Cobra PPRV Removal Information



BurnTire
03-17-07, 09:03 PM
How to remove the PPRV (Hesitation Creator).

The PPRV is known to cause hesitation issue between shifts in high boost applications.

Remove the Tank.

Be sure to disconnect the float arm before pulling the assembly all the way out of the tank. If you don't you will break the arm and or the sending unit.

When you go to install the new assemble put the float arm in the tank first then drop the assemble in.
Then re attach the float arm. BE CAREFUL WITH THE FLOAT ARM!!!!! An extra set of hands always helps. Take your time.

http://www.highperformancestangs.com/gallery/data/521/P9080034_copy.jpg

Remove the PPRV and Stock Plastic Hose

Replace with:

Carquest stocks the hose part number 27097

Gates 3/8" x 1' submersible fuel line. $20 a foot.

or Napa
Gates SAE30R10 (Gates # 27097), Napa part # H213

You will need 2 feet of hose. (You will need to trim the hose)

Get 6 smooth hose clamps and have fun.

You can reuse the stock Y fitting or buy a new one.

http://www.highperformancestangs.com/gallery/data/521/P9080036.JPG

jophis37
03-17-07, 09:33 PM
I'll be doing this mod in the near future, as well as upgrading the fuel line to the rails and the BAP wiring upgrade.

50 BMG
03-18-07, 08:20 AM
Yep. First 2 things I'll do when I drop the tank is PPRV removal and anti-siphon removal.

MinGry03
03-19-07, 10:18 AM
Great write-up. Mark, PJ-1 and myself will be doing that mod later this spring to my car.

u1arunit
03-23-07, 07:27 PM
Best mod to remove the hesitation!

PJ2 you better start buggin PJ1 to see when he is going to help! lol

BurnTire
03-23-07, 09:00 PM
Best mod to remove the hesitation!

PJ2 you better start buggin PJ1 to see when he is going to help! lol

Doesn't matter Mark does all the work.

P Machy
03-27-07, 03:37 PM
How does the Hesitation feel like?

I only get an odd hesitation when I dont lift off the clutch fast enough....

BurnTire
03-27-07, 03:41 PM
If you shift at a normal pace the car will fall on its face for a second between shifts. When you get back into WOT it will hesitate.

If you start spinning and pedal it the car will shut off for a second.

If you can shift super fast the hesitation usually does not occur.

My car was terrible. It was really bad until I removed the PPRV.

P Machy
03-27-07, 03:51 PM
Ahhh, OK.

Is it safe to say that this is an issue with the 04 models only?

That is the main crowd that I hear it from.

BurnTire
03-27-07, 03:52 PM
I think it happens with both.
It seems to occur mostly with 60lb injectors on high boost applications.

50 BMG
03-29-07, 12:04 PM
I think it happens with both.
It seems to occur mostly with 60lb injectors on high boost applications.

lol, you just explained 50-60% of all the terminators :Bucktooth:

BurnTire
03-29-07, 12:13 PM
lol, you just explained 50-60% of all the terminators :Bucktooth:

True.
Some have it some don't. LOL

u1arunit
04-02-07, 07:59 PM
Doesn't matter Mark does all the work.

LOL! True dat! :yes:

MinGry03
04-02-07, 08:08 PM
I always try to help...Mark pushes me out of the way....:pet: And I have been on PJ-1 about help... We might have to start bending fingers...lol

Lucafu1
04-02-07, 10:32 PM
i got rid of my hesitation with my tune but it does show its face every now and agian. i will do this cause thats a huge restriction on it. only thing im afraid of is popping frps with that pressure. i think i will run a KB disc but im waiting for an alternitive to the $20 washer lol. but in the end im sure i will have to buy one of theirs.

BurnTire
04-03-07, 01:35 AM
i got rid of my hesitation with my tune but it does show its face every now and agian. i will do this cause thats a huge restriction on it. only thing im afraid of is popping frps with that pressure. i think i will run a KB disc but im waiting for an alternitive to the $20 washer lol. but in the end im sure i will have to buy one of theirs.

KB disc was $5 shipped.

Lucafu1
04-03-07, 05:25 AM
KB disc was $5 shipped.

check out the post on modfords, they were recently charging $15 and $4.95 to ship!:huh:

BurnTire
04-10-07, 09:30 PM
check out the post on modfords, they were recently charging $15 and $4.95 to ship!:huh:


Inflation sucks.