PDA

View Full Version : me vs turbo350z



W1ck3d
07-20-07, 12:26 PM
i got a guy who wants to run my cobra (modds in sig) so far all he has is intake and he wants to run in a month when he gets his turbo and exhaust in what will my chances be when he has the turbo in any input will be good :pinkthumb:

4Jenna
07-20-07, 12:34 PM
Sounds like a typical ricer to me...when I get XXX I'll be soooo much faster than you...LOL

I did a quick search and a turbo kit for one of those (if its 03' or newer) is gonna cost the guy avg $5k and it puts them at 450hp...they claim whp gains of 125-150whp over stock. It should be pretty quick I would assume 12s.

Just tell him if you do a blower upgrade you'd be in the 10s lol.

Take it to the track...plain and simple

I have seen them run at Speedworld tons of times with intake/exh and run low 14s.

W1ck3d
07-20-07, 12:47 PM
thanks buddie! yeah ive also looked into it 5K plus labor and a good tune will be a big bill for him, he actually wants to race me now as is then he puled the "im waiting for my turbo in a month" ive done reserch as well ive read around those are very weak motors and is only a time bomb when FI im not worrying about it ive also checked out several vidz of alot of turbo 350's losin to M3's and srt-4's...illl try to grab it on vid and post here asap


Sounds like a typical ricer to me...when I get XXX I'll be soooo much faster than you...LOL

I did a quick search and a turbo kit for one of those (if its 03' or newer) is gonna cost the guy avg $5k and it puts them at 450hp...they claim whp gains of 125-150whp over stock. It should be pretty quick I would assume 12s.

Just tell him if you do a blower upgrade you'd be in the 10s lol.

Take it to the track...plain and simple

I have seen them run at Speedworld tons of times with intake/exh and run low 14s.

4Jenna
07-20-07, 12:53 PM
You'll dust him as is

fazm
07-20-07, 05:44 PM
come to firebird tonight. a white 350z turbo should be there. let ya know what ur up against.

4Jenna
07-20-07, 06:38 PM
You running?

fazm
07-21-07, 12:09 PM
ya, i ran with 255/50/17 street tires though lol.

traction is non existent with 460rwtq and street tires.

managed a 12.9 @ 111.5 with a 2.1 60'

oh and at 10.5psi

AZSonicSnake
07-22-07, 12:56 PM
yikes. why would you run street tires? i remember a nice set of et streets last time i was out at your shop....

fazm
07-22-07, 01:22 PM
yikes. why would you run street tires? i remember a nice set of et streets last time i was out at your shop....


wanted to see if i could make 13s with my dd tires. ended up with a 12, and at lower psi so i was happy.

next time i go, ill have the spray bar on, and the slicks/skinnies :)

AZSonicSnake
07-22-07, 04:58 PM
do i hear 11's? :bounce::twothumbsup:

silver03cobra
07-23-07, 12:45 PM
i killed the 350z with the plate tt350z and i know it was twin cause i built the car..... if it is a single they are eazy for a pulley cobra

Z O SICK
07-26-07, 01:59 PM
I think you'll take him. Just go from a low roll and dont let him brake boost lol.

W1ck3d
07-26-07, 02:15 PM
I think you'll take him. Just go from a low roll and dont let him brake boost lol.

i was thinking of doing it from a dig considering im gona be getig a set of MickyThompsons and a low roll as well

AZSonicSnake
07-29-07, 10:53 PM
get some practice in, with mt's and an irs wheel hop could be an issue....