PDA

View Full Version : ported intake any one Done by PSR



Dan
12-20-07, 10:42 PM
Ok now keep in mind I am just messing around . I have been porting for years and this is not something I like to do however I wanted to see it these intakes will make power. So I bought on and cut it up to see what makes them tick and I found a bunch of crap in side. There was a lot of casting flash that we removed . I have not gone threw and painted this or any thing this is a raw picture. And detailed pictures of the inside of your intake. Take a look. We normally port heads not intakes, But as you can see it does not take a rocket scientist to get the job done. We have enlarged quite a few areas that we feel would improve air flow.

Ok guys here are some shots on my little port work
First this is stock
http://i157.photobucket.com/albums/t72/psracing/P1040471.jpg


Now this is what it looks like now
http://i157.photobucket.com/albums/t72/psracing/P1040485.jpg
http://i157.photobucket.com/albums/t72/psracing/P1040484.jpg
http://i157.photobucket.com/albums/t72/psracing/P1040480.jpg
http://i157.photobucket.com/albums/t72/psracing/P1040479.jpg





Here is the one port that is almost closed off I have opened it up so it too can now add air to the motor. This was the only restricted port I seen
This is what it looks like now
http://i157.photobucket.com/albums/t72/psracing/P1040481.jpg
http://i157.photobucket.com/albums/t72/psracing/P1040482.jpg
Here are some more of the runners
http://i157.photobucket.com/albums/t72/psracing/P1040477.jpg
http://i157.photobucket.com/albums/t72/psracing/P1040476.jpg
And some of the top side
http://i157.photobucket.com/albums/t72/psracing/P1040478.jpg
http://i157.photobucket.com/albums/t72/psracing/P1040486.jpg
http://i157.photobucket.com/albums/t72/psracing/P1040489.jpg
http://i157.photobucket.com/albums/t72/psracing/P1040488.jpg
http://i157.photobucket.com/albums/t72/psracing/P1040487.jpg

AZSonicSnake
12-20-07, 10:47 PM
intresting, looks like there was definetly some improvement done. what kind of whp do you think could be gained?

Dan
12-21-07, 10:00 AM
no idea we shall see on indys car

AZSonicSnake
12-21-07, 05:47 PM
very cool! can't wait to see that one! :woot1:

bleedingfordblu
12-23-07, 11:12 PM
was this on the registry? i would love to do this to mine. ill have to save a little and see what i can do

Indy
12-23-07, 11:28 PM
was this on the registry? i would love to do this to mine. ill have to save a little and see what i can do

Yes, its posted on M1R too.

OH3MGSVT
12-24-07, 01:08 AM
hope it works better than Nazman's Intake work lol

IMSHAKN
12-24-07, 01:22 AM
hope it works better than Nazman's Intake work lol

Not a chance in hell. Dan's intake will come complete with a high quality metallic dust that is has been dyno proven to boost performance. :laughing:

In all seriousness, I would be curious to see how one of Dan's or Roy's intakes do on Indy's car with the spray. I'm looking to be hooked up on the giggle gas by this summer so squeezing out some more power would be nice.

Dan
12-24-07, 06:48 PM
No dynos dont mean sheit you should always use the A$$-O-Meter

famous words from Nazman

IMSHAKN
12-24-07, 07:32 PM
Dan, you don't need a dyno. Just addssome more fuel to compensate for the higher air flow and then do few 0-120mph pulls on public streets to feel how much power was gained. If it feels faster, then you must have gained at least 20hp. That's all that is important. Dyno's just give numbers :biglaugh:

Dan
12-26-07, 08:39 PM
lol that is funny