PDA

View Full Version : M90 for 2008 mustang gt



Sherrod
07-02-09, 09:30 PM
Hey everyone I really need to know if it is possible to put an eaton m90 supercharger on a 2008 mustang gt. and if so how much would it cost and what sort of numbers could i make. thank you everyone, i am very lost on this one. I am trying to save money but really want that belt driven whine and quick take offs

BurnTire
07-02-09, 09:52 PM
Not sure about that but a whipple will work.

Sherrod
07-02-09, 09:57 PM
see that's the thing I don't really have Whipple money the car cost me an arm and a leg I was kinda ripped off so I only have about 4000 to spend

BurnTire
07-02-09, 11:44 PM
What does a whipple cost these days for your car?

Sherrod
07-02-09, 11:49 PM
its around 5500 or more not to mention the install

Wharf Rat
07-03-09, 11:26 AM
The Roushchargers are Eaton M-90s. Unless you are getting a screaming deal on one I'd save up a few extra nickels and get a Whipple or Roush TVS.

Roush Stage 3's and 427Rs come with M-90s and put down about 375 rwhp give or take. The most you can get out of them is about 440 at the tires if you mod the crap out of it.

Sherrod
07-03-09, 11:35 PM
I think I am going to save I just want to know how much I am saving up to, because I want a forged engine that can handle 700rwhp so what type of $ am i looking at?

Jodaddy
07-04-09, 10:48 AM
just kenne bell the sucker and call it a day :biglaugh:

Wharf Rat
07-04-09, 11:48 AM
$4000 into the motor
$6000 for a good blower
$4000 for a TR-6060 because your stock tranny won't like 700 rwhp
+ Labor

That's a long way from what can I do with an Eaton...

Jodaddy
07-04-09, 01:22 PM
$4000 into the motor
$6000 for a good blower
$4000 for a TR-6060 because your stock tranny won't like 700 rwhp
+ Labor

That's a long way from what can I do with an Eaton...

i agree x2

Sherrod
07-04-09, 01:30 PM
that is expensive so it would just be better to go for around 500rwhp and call it a day, i cant afford that type of money im going into law school im going to be too broke. So do you guys think i will be ok if i just slap on a Roush TVS 2300?

Jodaddy
07-04-09, 11:22 PM
no comment on roush-chargers. Not a real big fan. I believe their over priced for what they are. I rather own a whipple, or a smaller kenne bell. But even with a 500 HP car you'll need some tranny work. New clutch atleast!
Talk to the guys at PSR they'll set you in the right direction for the right price.

Sherrod
07-05-09, 12:51 AM
Ok thats what I will do, where are they located because I am in Dallas? Also I agree with you on the roush prices, is it because you are still within warranty if it is installed by a roush certified vendor?

wickedcobra
07-05-09, 01:15 AM
700 for a wet kit and when it breaks fix it then :biglaugh:

OH3MGSVT
07-05-09, 01:38 PM
And be sure to launch it off the rev limiter at the track when you go :Bucktooth:

WildBill
07-05-09, 05:35 PM
Ok thats what I will do, where are they located because I am in Dallas? Also I agree with you on the roush prices, is it because you are still within warranty if it is installed by a roush certified vendor?

If you're in Dallas, you need to go see my friend Travis Franklin, the 2007and 2008 FunFord Renegade champion and owner of Gearhead Performance in Arlington.
Gear Heads Automotive and Performance
1200 Commercial Blvd S, Arlington, Texas 76001
Phone: 817-465-GEAR (4327)

You need to save up some more money if you want a new supercharger though.

Sherrod
07-05-09, 05:45 PM
Thank you everyone, wild bill i sent you a private message

WildBill
07-05-09, 05:59 PM
Thank you everyone, wild bill i sent you a private message

Glad to help!

SloSVO
07-15-09, 08:55 AM
Don't waste your money on a m90....too small

AODGTVert
07-16-09, 09:20 AM
M90 sounds like a semi-automatic weapon. lol