Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: BAHH!!! Oil Pan Plug

  1. #1
    Senior Member P Machy's Avatar
    Join Date
    Jul 2006
    Location
    So Cal
    Posts
    248

    BAHH!!! Oil Pan Plug



    Either Galpin (the dealer I bought the car from) or the previous owner really effed up the plug by wrenching on it the wrong way! :bird: & seriously -->

    I have done more then enough oil changes and this would of been my 1st on the Termee today since I picked her up in May! Yeah, yeah...ive been a little busy with racing! So I aint new to this and nor have I ever stripped the Pan's thread or the Plug!

    The Pan's thread looks good (must be stronger material than the Plug), but the plug is totally noticebly grooved :bleep, bleepppp!!!:

    I knew something was freaking horrid when the plug would not turn easily with my bare fingers once I loosened the plug with a 16mm wrench!

    So what do I do now! Jack another part of the Mach1?


    :crap:

  2. #2
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,618
    Quote Originally Posted by P Machy View Post


    Either Galpin (the dealer I bought the car from) or the previous owner really effed up the plug by wrenching on it the wrong way! :bird: & seriously -->

    I have done more then enough oil changes and this would of been my 1st on the Termee today since I picked her up in May! Yeah, yeah...ive been a little busy with racing! So I aint new to this and nor have I ever stripped the Pan's thread or the Plug!

    The Pan's thread looks good (must be stronger material than the Plug), but the plug is totally noticebly grooved :bleep, bleepppp!!!:

    I knew something was freaking horrid when the plug would not turn easily with my bare fingers once I loosened the plug with a 16mm wrench!

    So what do I do now! Jack another part of the Mach1?


    :crap:
    Go get a new one from Ford and try it out.
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  3. #3
    Senior Member P Machy's Avatar
    Join Date
    Jul 2006
    Location
    So Cal
    Posts
    248
    Yeah...just pissed cause I wasnt going to sit on my arse all night and post away!!!

    So they got them over the counter?

    I am really thinking of just jacking up the Mach1 and borrowing the plug...but it is dark outside and ive seen these bad kids around her recently. Shit, they even spray their crews name " BLACKWIDOWS "...sometimes it is hard to miss it...you kinda run into their spray

    MAN I AM SO AGRO!! I dont feel like changing the Focus oil either now

  4. #4
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,618
    Quote Originally Posted by P Machy View Post
    Yeah...just pissed cause I wasnt going to sit on my arse all night and post away!!!

    So they got them over the counter?

    I am really thinking of just jacking up the Mach1 and borrowing the plug...but it is dark outside and ive seen these bad kids around her recently. Shit, they even spray their crews name " BLACKWIDOWS "...sometimes it is hard to miss it...you kinda run into their spray

    MAN I AM SO AGRO!! I dont feel like changing the Focus oil either now
    I have a bad ass 2000 Focus ZX-3 130HP at the flywheel.
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  5. #5
    Senior Member P Machy's Avatar
    Join Date
    Jul 2006
    Location
    So Cal
    Posts
    248
    Quote Originally Posted by BurnTire View Post
    I have a bad ass 2000 Focus ZX-3 130HP at the flywheel.
    LMAO!!! you too?

    I actually hate it, but she has saved my butt alot of times when I broke the Mach1. Cant complain about the gas though....she is my step child :angel:

  6. #6
    Senior Member P Machy's Avatar
    Join Date
    Jul 2006
    Location
    So Cal
    Posts
    248
    SHIT! Now someone is hitting me up about the Mach1...10k with no trans?

    Own it out right....hum.....it is just sitting collecting dust too

  7. #7
    Senior Member Brakelate's Avatar
    Join Date
    Jun 2006
    Location
    Antelope Valley, CA
    Posts
    149
    It would go to a good home!

    I wonder how many Cobra owners also have owned a Focus. I've had two of them. Sorta miss my Blue SVTF. Funny that none are represented in the forums.

  8. #8
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,618
    Quote Originally Posted by Brakelate View Post
    It would go to a good home!

    I wonder how many Cobra owners also have owned a Focus. I've had two of them. Sorta miss my Blue SVTF. Funny that none are represented in the forums.
    I had a focus ,contour section at one time. it had zero posts.
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  9. #9
    Senior Member P Machy's Avatar
    Join Date
    Jul 2006
    Location
    So Cal
    Posts
    248
    Freaking 13bucks with TAX they say!

    mother fathers...this best bolt on with my bare fingers!

  10. #10
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,618
    Quote Originally Posted by P Machy View Post
    Freaking 13bucks with TAX they say!

    mother fathers...this best bolt on with my bare fingers!
    I just paid 44 bucks for 2 feet of submersible fuel line.
    Better get rid of my hesitation.
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •