Page 1 of 13 12311 ... LastLast
Results 1 to 10 of 126

Thread: Clutch and Roll Cage Project Full.

  1. #1
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,618

    Clutch and Roll Cage Project Full.

    Well after all the talk about my project and no action I finally got started. Started the interior stripping to install the MM 6 point roll bar.
    I have been weighing all the items so I will start a weight reduction thread soon.

    Ok now to the part I hate under the car I go for the clutch related items.



    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  2. #2
    Senior Member MinGry03's Avatar
    Join Date
    Jun 2006
    Location
    Pittsburgh, PA
    Posts
    476
    Looks Naked....
    PJ
    2003 Mineral Grey Cobra


  3. #3
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,618
    Yep Butt Naked
    Ok I have been slacking looking for a rear seat delete kit.
    Back to work I go.
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  4. #4
    Senior Member AZSonicSnake's Avatar
    Join Date
    Apr 2006
    Location
    North Phoenix
    Posts
    4,184
    Gold Award 
    wow! looks like something is missing...hahahaha...

    Tuned By PSR TUNING
    11.07 @ 127.93
    My Autolog Profile

  5. #5
    Super Moderator Gene's Avatar
    Join Date
    Dec 2005
    Location
    Phoenix
    Posts
    1,224
    Gold Award 
    sweet dude, I love doing my own work!

  6. #6
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,618
    One of the bolts on the xpipe to cat back stripped coming off. I can't get it off with an impact and I have no more cutoff wheels. Looks like I get a break until tomorrow.

    I need to get the car higher. I have it on ramps in the front and jack stands in the back. Where do most of you usually place the stands in the front?
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  7. #7
    Senior Member ASUSMC's Avatar
    Join Date
    Sep 2006
    Location
    Phoenix
    Posts
    1,663
    I usually put mine on my SFC's but I don't believe you have those....
    2012 Race Red GT w/ a 5 Liter and a 6 speed
    2010 Dodge Challenger R/T traded in.
    '03 DBS Cobra .... Traded in, THANK GOD
    '01 Ford Lightning.... Sold, sorely missed

  8. #8
    Senior Member Sqrlnts's Avatar
    Join Date
    Aug 2006
    Location
    Chandler AZ
    Posts
    243
    Somebody's girl is going on a diet!!

    When you say MM you mean Maximum Motorsports right? How was there service? I hear its topnotch.

    Quote Originally Posted by BurnTire View Post
    I have no more cutoff wheels. Looks like I get a break until tomorrow.
    Quitter!! I have a 24 hr Vatozone around the block and only stop once the beer is gone!
    Lates

  9. #9
    Senior Member Venomous Bite's Avatar
    Join Date
    Dec 2005
    Location
    to cool to put it down
    Posts
    219
    Yeah I put my stands on the sub frame connectors.

  10. #10
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,618
    I have subs but they are not full length. So putting them on the front is a little too far back and in the way. I may try the a arms.
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •