Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: So only Kenne Bell makes a twin screw for a 99 cobra motor???

  1. #1
    Junior Member A320PYLT's Avatar
    Join Date
    Aug 2009
    Location
    Cali
    Posts
    15

    So only Kenne Bell makes a twin screw for a 99 cobra motor???

    I have been looking under every stone for a twin screw for my motor and only Kenne seems to make one. Now I was all set to go twin turbo from HP Performance but I live in smogafornia and no turbo manufacture seems to have the CARB approval. This sucks because its a personal thing for me. The owner of this site I know I could take down with twin 57mm turbos and that would allow me to talk crap both on here and at work He knows just what I mean too!!

    If Keene is all there is then that's it that's all.

    A320Pylt

  2. #2
    Senior Member ChuckD's Avatar
    Join Date
    Jul 2006
    Location
    El Mirage
    Posts
    204
    Whipple, Magnacharger.
    Chuck
    VETERANS DIESEL SERVICE
    1988 LX
    1997 GT
    1997 F350 CC LWB Powerstroke
    2002 Expedition Eddie Bauer

  3. #3
    Junior Member A320PYLT's Avatar
    Join Date
    Aug 2009
    Location
    Cali
    Posts
    15
    When Ilook at the whipple site they have nothing listed for the 99 motor I will look at the magna right now.


    A320pylt

  4. #4
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,618
    Get the lower intake and other stuff to make the 03/04 cobra blowers fit your 99.
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  5. #5
    Junior Member A320PYLT's Avatar
    Join Date
    Aug 2009
    Location
    Cali
    Posts
    15
    Magna charger is a no go either. The set up to run the whipple is more complex than just the lower intake. I would need the entire drive section of the 03/04 all pulleys and brackets would have to be changed. ITS A NIGHTMARE and its all because of the dam smog crap!!!

  6. #6
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,618
    Quote Originally Posted by A320PYLT View Post
    Magna charger is a no go either. The set up to run the whipple is more complex than just the lower intake. I would need the entire drive section of the 03/04 all pulleys and brackets would have to be changed. ITS A NIGHTMARE and its all because of the dam smog crap!!!
    Look on ModFords for someone with a 03/04 cobra that is looking for your stuff for a turbo project. Swap the stuff out
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  7. #7
    Junior Member A320PYLT's Avatar
    Join Date
    Aug 2009
    Location
    Cali
    Posts
    15
    Even still they are not going to get rid of their accessoires section of brackets and pullies which is what would be needed to run the whipple on my motor.

    A320

  8. #8
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,618
    Blah Blah Blah. Spend the cash big boy.
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  9. #9
    Senior Member SloSVO's Avatar
    Join Date
    Oct 2008
    Location
    Buckeye, Az
    Posts
    586
    there is always a way to smog a car in cali...

  10. #10
    Junior Member A320PYLT's Avatar
    Join Date
    Aug 2009
    Location
    Cali
    Posts
    15
    Quote Originally Posted by SloSVO View Post
    there is always a way to smog a car in cali...
    Oh yeah I can pass the gasses test, its the visual inspection that would get me!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •