Results 1 to 10 of 18

Thread: Mustang Cobra PPRV Removal Information

Hybrid View

  1. #1
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,618

    Mustang Cobra PPRV Removal Information

    How to remove the PPRV (Hesitation Creator).

    The PPRV is known to cause hesitation issue between shifts in high boost applications.

    Remove the Tank.

    Be sure to disconnect the float arm before pulling the assembly all the way out of the tank. If you don't you will break the arm and or the sending unit.

    When you go to install the new assemble put the float arm in the tank first then drop the assemble in.
    Then re attach the float arm. BE CAREFUL WITH THE FLOAT ARM!!!!! An extra set of hands always helps. Take your time.



    Remove the PPRV and Stock Plastic Hose

    Replace with:

    Carquest stocks the hose part number 27097

    Gates 3/8" x 1' submersible fuel line. $20 a foot.

    or Napa
    Gates SAE30R10 (Gates # 27097), Napa part # H213

    You will need 2 feet of hose. (You will need to trim the hose)

    Get 6 smooth hose clamps and have fun.

    You can reuse the stock Y fitting or buy a new one.

    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  2. #2
    Junior Member
    Join Date
    Mar 2007
    Location
    Sierra Vista
    Posts
    28
    I'll be doing this mod in the near future, as well as upgrading the fuel line to the rails and the BAP wiring upgrade.
    Whipple Supercharger w140ax, Billet flow idlers, 3.5 upper, 4lb Metco lower, Pfab IC tank, Accufab throttle body, Jlt Intake, KB Boost-a-pump, Bassani X pipe w/ cats, Bassani cat back, Lakewood 70/30 front struts, Centerforce dual Friction clutch, Fidanza Flywheel, Billet flow irs brace, H&R race springs, Autometer Boost/Fp/Dynojet Wideband Commander, Xcal 2 tuned by Greg@Ret.

  3. #3
    Senior Member 50 BMG's Avatar
    Join Date
    Dec 2005
    Location
    AZ
    Posts
    770
    Gold Award 
    Yep. First 2 things I'll do when I drop the tank is PPRV removal and anti-siphon removal.

  4. #4
    Senior Member MinGry03's Avatar
    Join Date
    Jun 2006
    Location
    Pittsburgh, PA
    Posts
    476
    Great write-up. Mark, PJ-1 and myself will be doing that mod later this spring to my car.
    PJ
    2003 Mineral Grey Cobra


  5. #5
    Senior Member u1arunit's Avatar
    Join Date
    Jun 2006
    Location
    Pittsburgh, PA
    Posts
    366
    Best mod to remove the hesitation!

    PJ2 you better start buggin PJ1 to see when he is going to help! lol
    Mark
    Steel City Terminators
    '04 Black Cobra
    663RWHP / 665RWTQ

  6. #6
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,618
    Quote Originally Posted by u1arunit View Post
    Best mod to remove the hesitation!

    PJ2 you better start buggin PJ1 to see when he is going to help! lol
    Doesn't matter Mark does all the work.
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •