Results 1 to 5 of 5

Thread: ABS Light

  1. #1
    Junior Member
    Join Date
    Feb 2008
    Location
    Jacksonville
    Posts
    1

    ABS Light

    I recently purchased a 2003 Mach 1. I noticed today that the ABS light come on and stayed on and also the traction controll wouldnt turn on. The more that I watched it I started noticing that the ABS light would go off and traction control would come back on if I went over a small bump or something like that. I really believe that something is just loose but I have no idea where to start looking. If anyone has any ideas I would greatly appreciate them.

  2. #2
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,618
    I would start by checking all connections to your ABS sensors. There is a tone ring and sensor on each wheel.
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  3. #3
    Member DesertMach's Avatar
    Join Date
    Jun 2006
    Location
    Phoenix
    Posts
    62
    Quote Originally Posted by BurnTire View Post
    I would start by checking all connections to your ABS sensors. There is a tone ring and sensor on each wheel.
    I have heard of this same problem with other Machers, BurnTire is correct with what fixed the issue for others.
    They had wheel sensors go out which effect both the ABS and traction control. Good Luck.

  4. #4
    Senior Member ASUSMC's Avatar
    Join Date
    Sep 2006
    Location
    Phoenix
    Posts
    1,663
    My Cobra was doing the EXACT same thing except once they went off they stayed off. Mine was a bad wire
    2012 Race Red GT w/ a 5 Liter and a 6 speed
    2010 Dodge Challenger R/T traded in.
    '03 DBS Cobra .... Traded in, THANK GOD
    '01 Ford Lightning.... Sold, sorely missed

  5. #5
    Member Graham's Avatar
    Join Date
    Oct 2007
    Location
    Phoenix
    Posts
    66
    Quote Originally Posted by simmonsj619 View Post
    I recently purchased a 2003 Mach 1. I noticed today that the ABS light come on and stayed on and also the traction controll wouldnt turn on. The more that I watched it I started noticing that the ABS light would go off and traction control would come back on if I went over a small bump or something like that. I really believe that something is just loose but I have no idea where to start looking. If anyone has any ideas I would greatly appreciate them.
    Yeah man the abs and trac are in the same module so its prob just a wss. They take dumps all the time

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •