Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: 17 x 10 1/2" AFS Wheels

  1. #1
    Member GAZ's Avatar
    Join Date
    Oct 2008
    Location
    Gunnison Colorado
    Posts
    36

    17 x 10 1/2" AFS Wheels

    Does anybody know where I can find the AFS 17 x 10 1/2 wheels that match the stock mach look?

  2. #2
    Senior Member TorchedMach1's Avatar
    Join Date
    Nov 2006
    Location
    Phoenix
    Posts
    422
    Gold Award 
    Good luck man I got lucky and found a set. There is like a year wait or something for them from AFS. Last set I saw went on Ebay for like $850 for just the rear two rims. They are very hard to come by.
    Arizona's Fastest Mach 1
    11.14 @ 120 w/ 1.48 60'

    GO-FAST MODS
    Magnaflow O/R X-Pipe
    Magnaflow Catback
    Steeda CAI
    Torch Red JLt Intake Tube
    Steeda Tri-Ax
    Spec Stage 3 Clutch
    Built 31 Spline Rear w/ 4.10's
    Rear Upper and Lower Control Arms
    NX Wet Kit (100 Shot)
    SCT Chip
    Custom Tune by PSR

  3. #3
    Member GAZ's Avatar
    Join Date
    Oct 2008
    Location
    Gunnison Colorado
    Posts
    36
    Quote Originally Posted by TorchedMach1 View Post
    Good luck man I got lucky and found a set. There is like a year wait or something for them from AFS. Last set I saw went on Ebay for like $850 for just the rear two rims. They are very hard to come by.
    I know I keep calling AFS to see when they may be arriving, and they are absolutely zero help. They have No idea, None, when they may come in.

  4. #4
    Senior Member El Jefe's Avatar
    Join Date
    Mar 2006
    Location
    Tucson
    Posts
    840

  5. #5
    Member GAZ's Avatar
    Join Date
    Oct 2008
    Location
    Gunnison Colorado
    Posts
    36
    Quote Originally Posted by El Jefe View Post
    Really? who does that? and are they strong enough? I live in a remote part of Colorado. Don't know of anyone around here who does that.

  6. #6
    Senior Member TorchedMach1's Avatar
    Join Date
    Nov 2006
    Location
    Phoenix
    Posts
    422
    Gold Award 
    Yeah but if you get them widened they won't have that huge deep dish lip. You could also get your stockers widened to be 10.5 or 11 inches wide. Yes they are just as strong as stock when widened.
    Arizona's Fastest Mach 1
    11.14 @ 120 w/ 1.48 60'

    GO-FAST MODS
    Magnaflow O/R X-Pipe
    Magnaflow Catback
    Steeda CAI
    Torch Red JLt Intake Tube
    Steeda Tri-Ax
    Spec Stage 3 Clutch
    Built 31 Spline Rear w/ 4.10's
    Rear Upper and Lower Control Arms
    NX Wet Kit (100 Shot)
    SCT Chip
    Custom Tune by PSR

  7. #7
    Senior Member El Jefe's Avatar
    Join Date
    Mar 2006
    Location
    Tucson
    Posts
    840
    Quote Originally Posted by GAZ View Post
    Really? who does that? and are they strong enough? I live in a remote part of Colorado. Don't know of anyone around here who does that.
    http://www.weldcraftwheels.com/index.html


    Id also call some rim shops and ask if they know anyone who does.

    After some searching it seems AFS mailed a few sets of these rims out and then disappeared off the face of the planet. Probably your best bet at this point

    Quote Originally Posted by TorchedMach1 View Post
    Yeah but if you get them widened they won't have that huge deep dish lip. You could also get your stockers widened to be 10.5 or 11 inches wide. Yes they are just as strong as stock when widened.
    Not following...




    Looks like they add in the middle of the wheel. A deep dish mach rim would look sweet too




  8. #8
    Member GAZ's Avatar
    Join Date
    Oct 2008
    Location
    Gunnison Colorado
    Posts
    36
    Yea torchedmach1, I for sure want the deep dish look so widening probably is'nt an option. El Jeffe great pics that is the look I'm after, I saw a pair on a mach up at RMMR this Summer. How when did you here that AFS shipped some? I just got a E-mail back from them and they still have no ETA.

  9. #9
    Senior Member TorchedMach1's Avatar
    Join Date
    Nov 2006
    Location
    Phoenix
    Posts
    422
    Gold Award 
    Yeah I love the deep dish, and I couldn't be happier with mine. I also powder coated the centers black. Did you get on there waiting list. I got on there a few months ago just because. You don't have to pay until the rims are ready to ship either.

    Here's a couple pics of mine:





    Arizona's Fastest Mach 1
    11.14 @ 120 w/ 1.48 60'

    GO-FAST MODS
    Magnaflow O/R X-Pipe
    Magnaflow Catback
    Steeda CAI
    Torch Red JLt Intake Tube
    Steeda Tri-Ax
    Spec Stage 3 Clutch
    Built 31 Spline Rear w/ 4.10's
    Rear Upper and Lower Control Arms
    NX Wet Kit (100 Shot)
    SCT Chip
    Custom Tune by PSR

  10. #10
    Member GAZ's Avatar
    Join Date
    Oct 2008
    Location
    Gunnison Colorado
    Posts
    36
    Oh Yea, those look great, what size tires are you running? I guess I'm on there list, they say they will let me know when they come in. I keep checking with them though.....They don't seem very helpful. I mean they have absolutely no idea when they may come in!! like a day,week,year,century...., none,.... seems weird to me. And it sounds like there are several people who want them. So you would think that they would be a little motivated to get them in.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •