Results 1 to 3 of 3

Thread: Juiced46's multi-camera vids done

  1. #1
    Member 04snake's Avatar
    Join Date
    Aug 2006
    Location
    Upstate NY
    Posts
    88

    Juiced46's multi-camera vids done

    This is the 1.49 short time 6.73@107.4 1/8th pass of juiced46. Too bad he missed 4th and rolled out to a 10.9!
    If that was me there would have been some swearing!

    He launched harder on this one and came out snarling!

    For best results, right click.. save as.. and run from a local copy...



    http://04snake.com/movies/2006-juiced46-002-med.wmv 26Mg



    also HI-FI 5.1 version, bigger download
    http://04snake.com/movies/2006-juiced46-002.wmv 40Mg


    Low-Res 320x240 version 8Mg




    Here is his prior pass from the same rental,
    This was his first 10 with his new setup.


    http://04snake.com/movies/2006-juiced46-001-med.wmv 26Mg



    first HI-FI 5.1 version, ** bigger download **
    http://04snake.com/movies/2006-juiced46-001.wmv 46Mg


    Low-Res 320x240 version 9Mg



    It can be found on 04snake.com's movie page along with 580 or so other movies! 04snake.com/movies.htm

    in the Snake Pit Productions original video section: 04snake.com/movies.htm#MyOrig

    Be sure to throw your 2-cents in, good or bad.

  2. #2
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,618
    Cool Video
    Does this car have IRS or a Live Axle?
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  3. #3
    Member 04snake's Avatar
    Join Date
    Aug 2006
    Location
    Upstate NY
    Posts
    88
    Quote Originally Posted by BurnTire
    Cool Video
    Does this car have IRS or a Live Axle?
    \

    Dave swapped in a built 8.8 solid with a custom drag anti-roll bar made by Miller Racecraft, I believe, that lets you use normal over the axle exhasut pipes, pretty trick. unfortunately a couple weeks after this movie was filmed he blew up the motor pretty bad and hasn't figured out what he is doing, he might of even sold the twin screw already!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •