Page 1 of 3 123 LastLast
Results 1 to 10 of 25

Thread: Detailed some carz!!

  1. #1
    Senior Member Dalamar's Avatar
    Join Date
    Jun 2006
    Location
    SLC, UT.
    Posts
    145

    Detailed some carz!!

    Hey, thought you guys would wanna see this.

    I detailed a bunch of cars that got overspray on them.
    I'm sure liking this Poorboys stuff.

    First car, 06 Trailblaizer.
    washed
    claybar'd
    PB polish
    Nattys wax





    Silver 6 series.

    Before
    the Over spray doesn't show up much because of the color & metalic.

    Check out the OS the clay pulled off the roof.


    POLISHED

    Wiped off the polish, applied the
    EX sealer/Wax

    Check out the shine!!
    96 GT Modular Bastard
    Livernois Forged Stroker, TKO conversion, Wet/Dry Nitrous,
    Powerheads Stage 2 Ported PI Headswap & cams.
    MM suspension, 3-link and all that
    67 Fastback 351C, Ground up chassis, coilover susp w/ Cobra IRS - in progress...


  2. #2
    Senior Member Dalamar's Avatar
    Join Date
    Jun 2006
    Location
    SLC, UT.
    Posts
    145


    96 GT Modular Bastard
    Livernois Forged Stroker, TKO conversion, Wet/Dry Nitrous,
    Powerheads Stage 2 Ported PI Headswap & cams.
    MM suspension, 3-link and all that
    67 Fastback 351C, Ground up chassis, coilover susp w/ Cobra IRS - in progress...


  3. #3
    Senior Member Dalamar's Avatar
    Join Date
    Jun 2006
    Location
    SLC, UT.
    Posts
    145



    The black BMW....

    THis is the first Car I clayed with the Meguires clay last week. It didn't do a very good job.
    I spoke with the guy, told him I needed a more agressive clay and would finish another day.
    He was gone for a week or so.
    So I got that Blue clay magic and the more agressive Poorboys polishes, done a few cars as seen in this thread.
    This really shows the process, Black Shows EVERYTHING!!!
    Here's the decklid. I clayed half of it with the Megs clay last time. here's the overspray. this car had alot on it.
    (THIS IS WASHED!)

    The hood, that I clayed with Megs clay.... It's also pretty scuffed up. ALOT of swirls and scratches.
    you can see the specs that are left on it.


    SO, to start - I washed the car and dryed it.
    Good from far, far from good.
    96 GT Modular Bastard
    Livernois Forged Stroker, TKO conversion, Wet/Dry Nitrous,
    Powerheads Stage 2 Ported PI Headswap & cams.
    MM suspension, 3-link and all that
    67 Fastback 351C, Ground up chassis, coilover susp w/ Cobra IRS - in progress...


  4. #4
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619
    Feel free to come down and do mine anytime. LOL
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  5. #5
    Senior Member u1arunit's Avatar
    Join Date
    Jun 2006
    Location
    Pittsburgh, PA
    Posts
    366
    PoorBoys EX is good stuff. I personally use Clearkote Cannuba Moose Wax as a topper. Nattys is nice also though.
    Mark
    Steel City Terminators
    '04 Black Cobra
    663RWHP / 665RWTQ

  6. #6
    Senior Member Dalamar's Avatar
    Join Date
    Jun 2006
    Location
    SLC, UT.
    Posts
    145
    After the wash, Clayed the car.... alot....


    Polished with SSR2, and 2 passes of the fine polish, here's the last


    Final with the EX sealer/wax and let it sit for 1 HR to bond.

    Wiping it off is like opening a present


    Done and DONE

    96 GT Modular Bastard
    Livernois Forged Stroker, TKO conversion, Wet/Dry Nitrous,
    Powerheads Stage 2 Ported PI Headswap & cams.
    MM suspension, 3-link and all that
    67 Fastback 351C, Ground up chassis, coilover susp w/ Cobra IRS - in progress...


  7. #7
    Senior Member Dalamar's Avatar
    Join Date
    Jun 2006
    Location
    SLC, UT.
    Posts
    145
    Here's some interesting before and after shots.

    the decklid before (1/2 clayed)

    Clayed. you can see the swirls and stuff. some of the haze is from the clay.

    Polished twice, final with Poorboys EX
    96 GT Modular Bastard
    Livernois Forged Stroker, TKO conversion, Wet/Dry Nitrous,
    Powerheads Stage 2 Ported PI Headswap & cams.
    MM suspension, 3-link and all that
    67 Fastback 351C, Ground up chassis, coilover susp w/ Cobra IRS - in progress...


  8. #8
    Senior Member Dalamar's Avatar
    Join Date
    Jun 2006
    Location
    SLC, UT.
    Posts
    145
    Quote Originally Posted by BurnTire View Post
    Feel free to come down and do mine anytime. LOL
    Sure thing! White is easy. (my car is white)


    Quote Originally Posted by u1arunit View Post
    PoorBoys EX is good stuff. I personally use Clearkote Cannuba Moose Wax as a topper. Nattys is nice also though.
    I haven't tried the Clearkote stuff yet, but I hear a lot of good things about it.
    96 GT Modular Bastard
    Livernois Forged Stroker, TKO conversion, Wet/Dry Nitrous,
    Powerheads Stage 2 Ported PI Headswap & cams.
    MM suspension, 3-link and all that
    67 Fastback 351C, Ground up chassis, coilover susp w/ Cobra IRS - in progress...


  9. #9
    Senior Member vicious781's Avatar
    Join Date
    Feb 2006
    Location
    Surprise
    Posts
    353
    Can anyone recommend a good FAQ or how to on detailing? My Black Cobra could use some detailing and Im willing to spend some copious amount of time with her.

  10. #10
    Senior Member u1arunit's Avatar
    Join Date
    Jun 2006
    Location
    Pittsburgh, PA
    Posts
    366
    Quote Originally Posted by vicious781 View Post
    Can anyone recommend a good FAQ or how to on detailing? My Black Cobra could use some detailing and Im willing to spend some copious amount of time with her.
    Here you go:

    http://autopia.org/forum/index.php?&

    http://paintcare-n-detailing.com/

    Mark
    Steel City Terminators
    '04 Black Cobra
    663RWHP / 665RWTQ

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •