Keep getting new goodies in the mail.
MSD 2step

Strange 10 way shocks

MGW shifter

New race bullet mufflers

new MM steering shaft, i went with a flaming river rack for a fox body since i switched to fox spindles so the rack has to be shorter.

JLT carbon fiber RAI

New lower control arms, moroso catch can and misc. switches and stuff.


here are the switches for my IC pump, Water pump and Fuel pump. The line lock is on the console



Here is part of the electrical panel behind the dash that houses the MSD 2 step and relays, fuses etc..


Used another grommet in my firewall to pass all the wires through and for the 2 step harness.


Got a new Dragon TB and PL and a new port job done on the blower. Also installed billetflow pullies



Oil catch can installed


I insulated my IC box to see if it would aid in cooler IAT2's, we'll see


New exhaust is hung


Also welded in the ARB i got from Team Z and a fresh coat of paint on the rear end and new upper control arms installed




Since I have a fuel cell in the trunk of course I have to have it sealed off so i purchased a new rear seat delete kit and it turned out real well.


Interior mostly in.


Here is pretty much how the car sits now. Its about 90% completed. There is also more that I havent mentioned, Like switching to a wet nitrous kit and more that I cant think of right now lol. I will be adding more periodically. Sorry for the LONG post. Hope you enjoy for now!