Please help

[BLK03SVT]

I have FR500's on my car (10.5's in back) with Nitto 315's and when you first put th rims on it looks like they will rub the IRS bolt but as you lower the car back down the IRS bolt goes down with the body into a place where ther is more clearance, I plan on putting Hoosier 315's on this spring and I'm not worried about them rubbing. Lethal Performance sells a IRS bolt that's for more clearance too. There is plenty of room in the wheel wells too.

Do you have stock springs?

[Venomous Bite]

I had 315 bfg's on the stock wheels with no spacers on IRS but I also own a yellow car so .

[speedracer]

Do you have stock springs?

Yes.

[50 BMG]

Shaggy and I both had BFG 315 DR's on stock wheels with stock IRS bolts.

Never had an issue.

[Indy]

The bolts normally only touch the tire when the cars off the ground. Its not an issue under normal driving most of the time.

[NOEQUAL]

I have have 10.5 wheels and 315 nittos with a spacer and have no probs what so ever. I also have no probs with wheel hop at the track, at speed world i went 12.1@116 with a 1.9 60 no prob.